Go Seal-1200
lithium-based-densifying solution
Available Sizes
Go Seal-1200
lithium-based-densifying-solutions
GO SEAL-1200 is a premium lithium silicate hardener and densifier designed to strengthen, densify and protect concrete, marble and natural stone surfaces. The advanced water-based formulation penetrates deep into the substrate and reacts with free calcium compounds to form permanent Calcium Silicate Hydrate (C-S-H), creating a harder and denser wear layer. Unlike conventional hardening systems, GO SEAL-1200 provides advanced lithium densification throughout the surface, helping reduce dusting, lower water absorption and improve abrasion resistance. The treatment enhances durability while maintaining the natural appearance and breathability of the substrate. Suitable for new and existing surfaces, GO SEAL-1200 improves long-term performance in industrial, commercial and architectural applications. The treatment becomes an integral part of the substrate and will not peel, blister or flake like conventional coatings.
Key Highlights
- Premium lithium silicate technology for long-term hardening and densification
- Deep substrate penetration for enhanced durability
- Helps improve abrasion resistance and reduce surface wear
- Minimizes dusting and improves floor cleanliness
- Water-based formulation with low VOC content
- Helps improve surface gloss and visual clarity over time
Select Size
1KgAdditional Information
In detailed answers about product application, usage instructions and safety guidelines.
Apply GO SEAL-1200 using a clean low-pressure sprayer equipped with an adjustable spray tip. Distribute the material evenly using a microfiber applicator pad.
Application of GO SEAL-1200 may begin once the prepared surface is clean, dry and free from standing water. Do not apply to frozen, contaminated or saturated surfaces.
Concrete, marble and natural stone surfaces must be structurally sound, clean and absorbent prior to treatment. Any dust, dirt, oil, grease, curing compounds, coatings or contaminants that may interfere with penetration should be removed before application.
Existing cracks, damaged areas or substrate failures should be repaired prior to application.
Frequently Asked Questions
Quick answers to common questions about our products and services.
You might also like
Premium selections from the same collection
.webp)
.webp)
Need Detailed Specifications?
Explore our comprehensive collection of Technical Data Sheets (TDS) for all products.
Ready to Elevate
Your Craft?
Join thousands of professionals who trust Glaze Plus for premium stone care solutions. Get expert consultation and discover the perfect products for your needs.
Accredited by